MET - Materiali metallici

Componenti

Baricco Marcello (Coordinatore/Coordinatrice)
Castellero Alberto (Componente)
Dematteis Erika Michela (Componente)
Fiore Gianluca (Componente)
Palumbo Mauro (Componente)
Rizzi Paola (Componente)
Scaglione Federico (Componente)
Sgroi Mauro Francesco (Componente)

Contatti

Attività

Research activity

The research activity of the Laboratory of Metallurgy focused on topics related to materials for manufacturing and for energy applications. In detail, experience in the following topics has been developed:

Physical metallurgy of solidification and solid-state phase transformations.
Processing of metallic materials from the melt (arc-melting, rapid solidification and copper mould casting) and in the solid state (mechanical alloying).
Additive manufacturing of alloys: study of the influence of processing conditions on phase selection (non-equilibrium phase diagram calculation), microstructure and mechanical properties.
Characterization of the thermal stability, thermophysical properties and phase transformations in equilibrium and metastable metallic systems, by means of thermal analysis, X-ray diffraction and microscopy techniques.
Development of thermodynamic and kinetic models for phase transformations in metallic systems (e.g. Calphad). Calculation of phase diagrams and thermodynamic properties using ab initio techniques.
High entropy alloys: prediction of single-phase stability, synthesis and characterization.
De-alloying as a route for the synthesis of functional nanoporous metals.
Materials and systems for solid-state hydrogen storage and compression.
Electrolytes for all solid-state batteries.
Ab initio calculations of thermophysical properties of materials for batteries and hydrogen storage.
Thermoelectric materials for waste heat harvesting: synthesis and characterization.
Materials for radiation shielding in the space.
Life Cycle Assessment of materials and processes.
Archeometallurgy.

Conventional synthesis and characterization techniques (arc-melting, induction melting, X-ray diffraction, calorimetry, optical microscopy, scanning and transmission electron microscopy, microindentation, nanoindentation) are available in our laboratory, allowing experimental study of structural, microstructural, thermal, chemical, physical and mechanical properties of materials.

In the last four decades, expertise has been achieved in the development of amorphous alloys and metastable metallic materials. Processing of alloys using non-equilibrium techniques (melt spinning, mould and wire casting, mechanical alloying) is used to obtain this kind of material, showing soft magnetic properties and interesting mechanical properties (high elastic deformation, low Young modulus, high yield strength).

More recently, a comparative study of Al-based commercial alloys obtained by additive manufacturing and rapid solidification showed the influence of process parameters on phase selection, microstructures and mechanical properties.

upload_Fig._1_new-ENG1.png

A novel class of material is represented by high entropy alloys forming a multicomponents (N≥5) single phase. A predictive model for single phase stability was developed on the basis of thermodynamic criteria. Such alloys show a potential for refractory, corrosion and radiation resistant applications, as well as for processing by additive manufacturing.

Another field of research is the synthesis of porous metals by selective chemical de-alloying. Using this method, the phases containing the less noble element can be selectively removed, leading to the formation of a porous material where the dimension of the pores depends on the microstructure of the starting alloy. Metallic alloys showing high surface area and interesting catalytic properties can be obtained with this method.

In order to obtain a deep understanding of the fundamental physical properties for the investigated materials, theoretical modeling is performed to compare simulation and experimental results. In particular, modeling of thermodynamic properties and phase diagrams by means of CALPHAD and ab-initio methods can be used to describe and understand experimental results.

upload_Fig.3_new-ENG.png

The research has been also focused on the study of materials for energy storage and harvesting.

The former includes intermetallic compounds and complex hydrides with high potential for various applications. The capacity, cyclability, thermodynamic and kinetic properties of these materials are experimentally characterized by means of PCI and high-pressure DSC facilities, coupled with standard structural characterisation. The integration of solid-state hydrogen tanks with fuel cells for stationary and transport applications are developed. Mor recently, metal hydrides are studied for solid-state hydrogen compression.

upload_Fig._4_new-ENG1.png upload_Fig._5_new-ENG2.png

The latter include thermoelectric materials for harvesting of waste heat and its conversion into electricity. The activities focus on the processing of thermoelectric materials for the medium and high temperature ranges (e.g. Half-Heusler and Heusler alloys, AgSbTe₂, skutterudites, Zn₄Sb₃) and the correlation between microstructure/structure and thermoelectric properties.

Life Cycle Assessment (LCA) studies are running on various processes, including hydrogen-based technologies and recycling of materials.

Archeometallurgy studies are performed on ancient metallic artefacts as well as on slags.

Progetti

Prodotti della ricerca

Thermophysical parameters governing the glass formation and crystallization of CuZr
2023-01-01 Castellero, A; Battezzati, L https://iris.unito.it/handle/2318/1904344

Roadmap on thermoelectricity
2023-01-01 Artini, Cristina; Pennelli, Giovanni; Graziosi, Patrizio; Li, Zhen; Neophytou, Neophytos; Melis, Claudio; Colombo, Luciano; Isotta, Eleonora; Lohani, Ketan; Scardi, Paolo; Castellero, Alberto; Baricco, Marcello; Palumbo, Mauro; Casassa, Silvia; Maschio, Lorenzo; Pani, Marcella; Latronico, Giovanna; Mele, Paolo; Di Benedetto, Francesca; Contento, Gaetano; De Riccardis, Maria Federica; Fucci, Raffaele; Palazzo, Barbara; Rizzo, Antonella; Demontis, Valeria; Prete, Domenic; Isram, Muhammad; Rossella, Francesco; Ferrario, Alberto; Miozzo, Alvise; Boldrini, Stefano; Dimaggio, Elisabetta; Franzini, Marcello; Galliano, Simone; Barolo, Claudia; Mardi, Saeed; Reale, Andrea; Lorenzi, Bruno; Narducci, Dario; Trifiletti, Vanira; Milita, Silvia; Bellucci, Alessandro; Trucchi, Daniele M https://iris.unito.it/handle/2318/1904527

Experimental and computational study of the role of defects and secondary phases on the thermoelectric properties of TiNi1+xSn (0 ≤x≤ 0.12) half Heusler compounds
2023-01-01 Ascrizzi, Eleonora; Casassa, Silvia; Daga, Loredana Edith; Dasmahapatra, Atreyi; Maschio, Lorenzo; Karttunen, Antti J; Boldrini, Stefano; Ferrario, Alberto; Fanciulli, Carlo; Aversano, Francesco; Baricco, Marcello; Castellero, Alberto https://iris.unito.it/handle/2318/1904528

Itinerant magnetism, electronic properties and half-metallicity of Co2ZrSn and Co2HfSn Heusler alloys
2022-01-01 Difalco, Alessandro; Barrera, Gabriele; Palumbo, Mauro; Castellero, Alberto; Baricco, Marcello; Tiberto, Paola Maria; Allia, Paolo https://iris.unito.it/handle/2318/1862542

Role of secondary phases and thermal cycling on thermoelectric properties of TiNiSn half-Heusler alloy prepared by different processing routes
2020-01-01 Aversano F.; Palumbo M.; Ferrario A.; Boldrini S.; Fanciulli C.; Baricco M.; Castellero A. https://iris.unito.it/handle/2318/1760995

Hirscher, Michael, Yartys, Volodymyr A , Baricco, Marcello, Bellosta von Colbe, Jose, Blanchard, Didier, Bowman, Robert C , Broom, Darren P , Buckley, Craig E , Chang, Fei, Chen, Ping, Cho, Young Whan, Crivello, Jean-Claude, Cuevas, Fermin, David, William I F , de Jongh, Petra E , Denys, Roman V , Dornheim, Martin, Felderhoff, Michael, Filinchuk, Yaroslav, Froudakis, George E , Grant, David M , Gray, Evan MacA , Hauback, Bjørn C , He, Teng, Humphries, Terry D , Jensen, Torben R , Kim, Sangryun, Kojima, Yoshitsugu, Latroche, Michel, Li, Hai-Wen, Lototskyy, Mykhaylo V , Makepeace, Joshua W , Møller, Kasper T , Naheed, Lubna, Ngene, Peter, Noréus, Dag, Nygård, Magnus Moe, Orimo, Shin-ichi, Paskevicius, Mark, Pasquini, Luca, Ravnsbæk, Dorthe B , Veronica Sofianos, M , Udovic, Terrence J , Vegge, Tejs, Walker, Gavin S , Webb, Colin J , Weidenthaler, Claudia, Zlotea, Claudia (2020)
Materials for hydrogen-based energy storage – past, recent progress and future outlook.
https://iris.unito.it/handle/2318/1740145

Gianoglio D , Marola S , Battezzati L , Aversa A , Bosio F , Lombardi M , Manfredi D , Lorusso M (2020)
Banded microstructures in rapidly solidified Al-3 wt% Er.
https://iris.unito.it/handle/2318/1728250

Marola S , Gianoglio D , Bosio F , Aversa A , Lorusso M , Manfredi D , Lombardi M , Battezzati L (2020)
Alloying AlSi10Mg and Cu powders in laser Single Scan Tracks, melt spinning, and Laser Powder Bed Fusion.
https://iris.unito.it/handle/2318/1755963

Valerio Gulino, Anna Wolczyk, Andrey A Golov, Roman A Eremin, Mauro Palumbo, Carlo Nervi, Vladislav A Blatov, Davide M Proserpio, Marcello Baricco (2020)
Combined {DFT} and geometrical{ extendash}topological analysis of Li-ion conductivity in complex hydrides.
https://iris.unito.it/handle/2318/1755633

Difalco, Alessandro, Aversano, Francesco, Boldrini, Stefano, Ferrario, Alberto, Baricco, Marcello, Castellero, Alberto (2020)
Synthesis and Characterization of Thermoelectric Co2XSn (X = Zr, Hf) Heusler Alloys.
https://iris.unito.it/handle/2318/1738683

Castellero, Alberto, Fiore, Gianluca, Van Steenberge, Nele, Battezzati, Livio (2020)
Processing a Fe67Mo4.5Cr2.3Al2Si3C7P8.7B5.5 metallic glass: Experimental and computed TTT and CCT curves.
https://iris.unito.it/handle/2318/1742084

Aversano, F , Branz, S , Bassani, E , Fanciulli, C , Ferrario, A , Boldrini, S , Baricco, M , Castellero, A (2019)
Effect of rapid solidification on the synthesis and thermoelectric properties of Yb-filled Co4Sb12 skutterudite.
https://iris.unito.it/handle/2318/1704066

Wang P , Kossmann J , Kattner U R , Palumbo M , Hammerschmidt T , Olson G B (2019)
Thermodynamic assessment of the Co-Ta system.
https://iris.unito.it/handle/2318/1730202

Scaglione, F , Alladio, E , Damin, A , Turci, F , Baggiani, C , Giovannoli, C , Bordiga, S , Battezzati, L , Rizzi, P (2019)
Functionalized nanoporous gold as a new biosensor platform for ultra-low quantitative detection of human serum albumin.
https://iris.unito.it/handle/2318/1694719

Yartys, V A *, Lototskyy, M V , Akiba, E , Albert, R , Antonov, V E , Ares, J R , Baricco, M , Bourgeois, N , Buckley, C E , Bellosta von Colbe, J M , Crivello, J -C , Cuevas, F , Denys, R V , Dornheim, M , Felderhoff, M , Grant, D M , Hauback, B C , Humphries, T D , Jacob, I , Jensen, T R , de Jongh, P E , Joubert, J -M , Kuzovnikov, M A , Latroche, M , Paskevicius, M , Pasquini, L , Popilevsky, L , Skripnyuk, V M , Rabkin, E , Sofianos, M V , Stuart, A , Walker, G , Wang, Hui, Webb, C J , Zhu, Min (2019)
Magnesium based materials for hydrogen based energy storage: Past, present and future.
https://iris.unito.it/handle/2318/1695316

Bellosta von Colbe, Jose, Ares, Jose-Ramón, Barale, Jussara, Baricco, Marcello, Buckley, Craig, Capurso, Giovanni, Gallandat, Noris, Grant, David M , Guzik, Matylda N , Jacob, Isaac, Jensen, Emil H , Jensen, Torben, Jepsen, Julian, Klassen, Thomas, Lototskyy, Mykhaylol V , Manickam, Kandavel, Montone, Amelia, Puszkiel, Julian, Sartori, Sabrina, Sheppard, Drew A , Stuart, Alastair, Walker, Gavin, Webb, Colin J , Yang, Heena, Yartys, Volodymyr, Züttel, Andreas, Dornheim, Martin* (2019)
Application of hydrides in hydrogen storage and compression: Achievements, outlook and perspectives.
https://iris.unito.it/handle/2318/1695314

Milanese, C *, Jensen, T R , Hauback, B C , Pistidda, C , Dornheim, M , Yang, H , Lombardo, L , Zuettel, A , Filinchuk, Y , Ngene, P , de Jongh, P E , Buckley, C E , Dematteis, E M , Baricco, M (2019)
Complex hydrides for energy storage.
https://iris.unito.it/handle/2318/1695317

Marola, Silvia, Manfredi, Diego, Fiore, Gianluca, Poletti, Marco Gabriele, Lombardi, Mariangela, Fino, Paolo, Battezzati, Livio* (2018)
A comparison of Selective Laser Melting with bulk rapid solidification of AlSi10Mg alloy.
https://iris.unito.it/handle/2318/1662567

Scaglione, Federico*, Xue, Yanpeng, Celegato, Federica, Rizzi, Paola, Battezzati, Livio (2018)
Amorphous molybdenum sulphide @ nanoporous gold as catalyst for hydrogen evolution reaction in acidic environment.
https://iris.unito.it/handle/2318/1691341

Paschalidou, E M *, Fiore, G , Xue, Y , Scaglione, F , Celegato, F , Gebert, A , Oswald, S , Wolff, U , Rizzi, P , Battezzati, L (2018)
Comparing selective corrosion of Au-based amorphous, partially amorphous, and devitrified alloys.
https://iris.unito.it/handle/2318/1661959

Baricco, Marcello, Bang, Mads, Fichtner, Maximilian, Hauback, Bjorn, Linder, Marc, Luetto, Carlo, Moretto, Pietro, Sgroi, Mauro (2017)
SSH2S: Hydrogen storage in complex hydrides for an auxiliary power unit based on high temperature proton exchange membrane fuel cells.
https://iris.unito.it/handle/2318/1622883

Wolczyk, Anna, Paik, Biswajit, Sato, Toyoto, Nervi, Carlo, Brighi, Matteo, Gharibdoust, SeyedHosein Payandeh, Chierotti, Michele, Matsuo, Motoaki, Li, Guanqiao, Gobetto, Roberto, Jensen, Torben R , ?erný, Radovan, Orimo, Shin-ichi, Baricco, Marcello (2017)
Li5(BH4)3NH: Lithium-Rich Mixed Anion Complex Hydride.
https://iris.unito.it/handle/2318/1637919

Hu, Jianjiang, Fichtner, Maximilian, Baricco, Marcello (2017)
Preparation of Li-Mg-N-H hydrogen storage materials for an auxiliary power unit.
https://iris.unito.it/handle/2318/1645628

Belmonte, Nadia, Luetto, Carlo, Staulo, Stefano, Rizzi, Paola, Baricco, Marcello (2017)
Case Studies of Energy Storage with Fuel Cells and Batteries for Stationary and Mobile Applications.
https://iris.unito.it/handle/2318/1629940

Castellero, Alberto, Fiore, Gianluca, Evenstein, Eliran, Baricco, Marcello, Amouyal, Yaron (2017)
Effects of Rapid Solidification on Phase Formation and Microstructure Evolution of AgSbTe2-Based Thermoelectric Compounds.
https://iris.unito.it/handle/2318/1621672

Poletti, Marco Gabriele, Fiore, Gianluca, Gili, Flavia, Mangherini, Davide, Battezzati, Livio (2017)
Development of a new high entropy alloy for wear resistance: FeCoCrNiW0.3 and FeCoCrNiW0.3+5 at.% of C.
https://iris.unito.it/handle/2318/1633079

Palumbo M , Dal Corso A (2017)
Lattice dynamics and thermophysical properties of h.c.p. Re and Tc from the quasi-harmonic approximation.
https://iris.unito.it/handle/2318/1730189

Palumbo M , Dal Corso A (2017)
Lattice dynamics and thermophysical properties of h.c.p. Os and Ru from the quasi-harmonic approximation.
https://iris.unito.it/handle/2318/1730185

Breidi A , Fries S G , Palumbo M , Ruban A V (2016)
First-principles modeling of energetic and mechanical properties of Ni-Cr, Ni-Re and Cr-Re random alloys.
https://iris.unito.it/handle/2318/1730187

Vitillo, Jenny G , Bordiga, Silvia, Baricco, Marcello (2016)
Spectroscopic and Structural Characterization of Thermal Decomposition of ?-Mg(BH4)2: Dynamic Vacuum versus H2 Atmosphere.
https://iris.unito.it/handle/2318/1541043

Cottafava, Dario, Gambino, Paolo, Baricco, Marcello, Tartaglino, Andrea (2016)
Energy efficiency in a large University: the Unito experience.
https://iris.unito.it/handle/2318/1622870

Elena M Brach del Prever, Luigi Costa, Corrado Piconi, Marcello Baricco, Alessandro Massè (2016)
Biomaterials for Total Joint Replacements.
https://iris.unito.it/handle/2318/1622868

Wolczyk, Anna, Pinatel, Eugenio R , Chierotti, Michele R , Nervi, Carlo, Gobetto, Roberto, Baricco, Marcello (2016)
Solid-state NMR and thermodynamic investigations on LiBH4-LiNH2 system.
https://iris.unito.it/handle/2318/1570874

Dematteis, Erika M , Roedern, Elsa, Pinatel, Eugenio R , Corno, Marta, Jensen, Torben R , Baricco, Marcello (2016)
A thermodynamic investigation of the LiBH4-NaBH4 system.
https://iris.unito.it/handle/2318/1570876

Callini, Elsa, Atakli, Zuleyha Özlem Kocabas, Hauback, Bjørn C , Orimo, Shin-ichi, Jensen, Craig, Dornheim, Martin, Grant, David, Cho, Young Whan, Chen, Ping, Hjörvarsson, Bjørgvin, de Jongh, Petra, Weidenthaler, Claudia, Baricco, Marcello, Paskevicius, Mark, Jensen, Torben R , Bowden, Mark E , Autrey, Thomas S , Züttel, Andreas (2016)
Complex and liquid hydrides for energy storage.
https://iris.unito.it/handle/2318/1570832

Sarker, S , Chandra, D, Hirscher, M , Dolan, M , Isheim, D , Wermer, J , Viano, D , Baricco, M , Udovic, T J , Grant, D , Palumbo, O , Paolone, A , Cantelli, R (2016)
Developments in the Ni?Nb?Zr amorphous alloy membranes: A review.
https://iris.unito.it/handle/2318/1570817

Santoru, Antonio, Pistidda, Claudio, Sørby, Magnus H , Chierotti, Michele R , Garroni, Sebastiano, Pinatel, Eugenio, Karimi, Fahim, Cao, Hujun, Bergemann, Nils, Le, Thi T , Puszkiel, Julián, Gobetto, Roberto, Baricco, Marcello, Hauback, Bjørn C , Klassen, Thomas, Dornheim, Martin (2016)
KNH2-KH: A metal amide-hydride solid solution.
https://iris.unito.it/handle/2318/1611998

Tiberto, Paola, Celegato, Federica, Barrera, Gabriele, Coisson, Marco, Vinai, Franco, Rizzi, Paola (2016)
Magnetization reversal and microstructure in polycrystalline Fe50Pd50dot arrays by self-assembling of polystyrene nanospheres.
https://iris.unito.it/handle/2318/1591636

Rezvani, S J , Gunnella, R , Neilson, D , Boarino, L , Croin, L , Aprile, G , Fretto, M , Rizzi, P , Antonioli, D , Pinto, N (2016)
Effect of carrier tunneling on the structure of Si nanowires fabricated by metal assisted etching.
https://iris.unito.it/handle/2318/1592925

Belmonte, N , Girgenti, V , Florian, P , Peano, C , Luetto, C , Rizzi, P, Baricco, M (2016)
A comparison of energy storage from renewable sources through batteries and fuel cells: A case study in Turin, Italy.
https://iris.unito.it/handle/2318/1622880

Dalla Fontana, Giulia, Castellero, Alberto, Battezzati, Livio (2016)
Thermodynamics and fragility of Fe-based glass forming melts.
https://iris.unito.it/handle/2318/1534482

Alinejad, Babak, Castellero, Alberto, Baricco, Marcello (2016)
Full dense CoSb3 single phase with high thermoelectric performance prepared by oscillated cooling method.
https://iris.unito.it/handle/2318/1533777

Paschalidou, Eirini Maria, Scaglione, Federico, Gebert, Annett, Oswald, Steffen, Rizzi, Paola, Battezzati, Livio (2016)
Partially and fully de-alloyed glassy ribbons based on Au: Application in methanol electro-oxidation studies.
https://iris.unito.it/handle/2318/1591724

Paschalidou, E M, Celegato, F , Scaglione, F , Rizzi, P , Battezzati, L , Gebert, A , Oswald, S , Wolff, U , Mihaylov, L , Spassov, T (2016)
The mechanism of generating nanoporous Au by de-alloying amorphous alloys.
https://iris.unito.it/handle/2318/1591704

Xue, Yanpeng, Scaglione, Federico, Paschalidou, Eirini Maria, Rizzi, Paola, Battezzati, Livio (2016)
Excellent surface enhanced Raman scattering obtained with nanoporous gold fabricated by chemical de-alloying.
https://iris.unito.it/handle/2318/1622891

Sundman B , Kattner U R , Sigli C , Stratmann M , Le Tellier R , Palumbo M , Fries S G (2016)
The OpenCalphad thermodynamic software interface.
https://iris.unito.it/handle/2318/1730176

Sundman B , Kattner U R , Palumbo M , Fries S G (2015)
OpenCalphad - a free thermodynamic software.
https://iris.unito.it/handle/2318/1730179

Zavorotynska, Olena, Deledda, Stefano, Vitillo, Jenny, Saldan, Ivan, Guzik, Matylda, Baricco, Marcello, Walmsley, John, Muller, Jiri, Hauback, Bjørn (2015)
Combined X-ray and Raman Studies on the Effect of Cobalt Additives on the Decomposition of Magnesium Borohydride.
https://iris.unito.it/handle/2318/1523540

Daphiny Pottmaier, Marcello Baricco (2015)
Materials for hydrogen storage and the Na-Mg-B-H system.
https://iris.unito.it/handle/2318/155020

Pinatel, E R, Albanese, E , Civalleri, B , Baricco, M (2015)
Thermodynamic modelling of Mg(BH4)2.
https://iris.unito.it/handle/2318/1522010

Gobetto, Roberto, Baricco, Marcello, Chierotti, Michele R , Franco, Federico, Nervi, Carlo, Paruzzo, Federico M , Wolczyk, Anna R (2015)
Synthesis and characterization of novel hydrogen storage materials.
https://iris.unito.it/handle/2318/1569792

Pinatel, Eugenio Riccardo, Palumbo, Mauro, Massimino, Francesco, Rizzi, Paola, Baricco, Marcello (2015)
Hydrogen sorption in the LaNi5-xAlx-H system (0 ? x ? 1).
https://iris.unito.it/handle/2318/1522009

Rizzi, P , Pinatel, E , Luetto, C , Florian, P , Graizzaro, A , Gagliano, S , Baricco, M (2015)
Integration of a PEM fuel cell with a metal hydride tank for stationary applications.
https://iris.unito.it/handle/2318/1523537

C Giovannoli, F Turci, P Rizzi, G Spano, L Anfossi, A Damin, S Bordiga, C Baggiani (2015)
Biosensing development on novel nanoporous functionalized gold.
https://iris.unito.it/handle/2318/1525592

Scaglione, F, Celegato, F , Rizzi, P , Battezzati, L (2015)
A comparison of de-alloying crystalline and amorphous multicomponent Au alloys.
https://iris.unito.it/handle/2318/1523100

Scaglione, F, Paschalidou, E M , Rizzi, P , Bordiga, S , Battezzati, L (2015)
Nanoporous gold obtained from a metallic glass precursor used as substrate for surface-enhanced Raman scattering.
https://iris.unito.it/handle/2318/1532255

Castellero, A , Fanciulli, C , Carlini, R , Fiore, G , Mele, P , Passaretti, F , Baricco, M (2015)
Effect of processing routes on the synthesis and properties of Zn4Sb3 thermoelectric alloy.
https://iris.unito.it/handle/2318/1530361

M G Poletti, L Battezzati (2014)
Electronic and thermodynamic criteria for the occurrence of high entropy alloys in metallic systems.
https://iris.unito.it/handle/2318/156895

P. Rizzi, F. Scaglione, L. Battezzati
Nanoporous gold by dealloying of an amorphous precursor
http://hdl.handle.net/2318/141754

Chandler A. Becker,John Ågren,Marcello Baricco,Qing Chen,Sergei A. Decterov,Ursula R. Kattner,John H. Perepezko,Gernot R. Pottlacher,Malin Selleby
Thermodynamic modelling of liquids: CALPHAD approaches and contributions from statistical physics
http://hdl.handle.net/2318/146180

P. Rizzi, I. Corazzari, G. Fiore, I. Fenoglio, B. Fubini, S. Kaciulis, L. Battezzati
Ion release and tarnishing behavior of Au and Pd based amorphous alloys in arti?cial sweat
http://hdl.handle.net/2318/138423

Line H Rude, Elena Groppo, Lene M Arnbjerg, Dorthe B Ravnsbæk, Regitze R , , Aagaard, Yaroslav Filinchuk, Marcello Baricco, Flemming Besebacher, Torben R Jensen (2011)
Iodide substitution in lithium borohydride, LiBH4-LiI.
https://iris.unito.it/handle/2318/132709

J Urgnani, F J Torres, M Palumbo, M Baricco (2008)
Hydrogen release from solid state NaBH4.
https://iris.unito.it/handle/2318/55596

P TIBERTO, M BARICCO, E OLIVETTI, R PICCIN (2007)
Magnetic Properties of Bulk Metallic Glasses.
https://iris.unito.it/handle/2318/1945